AGP Picks
View all

FIDER pitches parallel feeder system for high-mix small-parts assembly

Oct. 29, 2026
FIDER pitches parallel feeder system for high-mix small-parts assembly
By AI, Created 19:43 UTC, Oct 29, 2026, AGP -

FIDER says a parallel flexible feeder system can help manufacturers feed different parts at the same time, cut changeover downtime and avoid bottlenecks in high-mix assembly. The company positions the approach for connectors, sensors and medical-device production where multiple components must reach one robot station without slowing output.

Why it matters: - High-mix assembly lines often need to deliver multiple dissimilar parts to one robot at the same time. - A parallel feeder setup is designed to reduce bottlenecks, part starvation and downtime during batch changes. - FIDER says the approach is aimed at manufacturers that need higher uptime and faster changeovers in small-parts production.

What happened: - FIDER published a technical overview of its Parallel Flexible Feeder System for high-mix discrete assembly. - The system is built around two or more independent multi-axis vibrating feeding platforms in a shared robotic workspace. - The configuration is intended for automated cells assembling connectors, sensors and medical devices. - FIDER directs readers to more technical specifications and consultation details for system configurations.

The details: - Each feeder platform is dedicated to a specific component type instead of forcing different parts onto one vibrating surface. - The architecture uses independent vibration platforms with voice-coil or electrodynamic actuators tuned to component mass. - The design can include separate optical inspection zones, either with dedicated cameras or one wide-field sensor with split illumination. - Independent bulk storage hoppers replenish each feeder tray based on optical density measurements. - A centralized programmable logic controller coordinates robot motion across all active feeding zones. - The setup is designed to let heavy metal stampings and lightweight plastic clips feed at the same time without interference. - FIDER says a single high-speed Delta robot or dual-arm gantry can pick a housing from one platform and then retrieve multiple pins from another. - The company says the arrangement can support steady output between 50 and 75 assemblies per minute. - For asymmetric part ratios, separate control loops let one platform feed a housing every two seconds while another presents four terminal pins per second. - Independent hopper replenishment is meant to prevent excess buildup on low-consumption trays and shortages on high-ratio trays. - The system also supports alternating changeovers, where one platform keeps running while the next recipe is loaded on the other platform. - FIDER says the master controller can switch the robot pick window between platforms in milliseconds. - The system includes redundancy features such as single-station fallback mode, tool-free tray swaps in under 60 seconds, isolated shock mounts and segregated vacuum lines. - FIDER says the modular cell can reach placement tolerances of ±0.05 mm.

Between the lines: - The pitch reflects a broader automation trend: manufacturers want more flexibility from a single cell instead of dedicating separate machines to each part family. - The strongest value case is in environments with frequent variant changes, uneven part counts and limited cleanroom floor space. - FIDER is framing the system as both a throughput tool and a resilience upgrade, not just a feeder redesign.

What's next: - FIDER says manufacturers can evaluate part geometry diversity and changeover frequency to decide whether a parallel feeder system makes sense. - The company is offering engineering consultations for facilities considering multi-part assembly integration. - Adoption will likely hinge on whether production teams can justify the higher capital cost against uptime gains and reduced changeover losses.

The bottom line: - FIDER is betting that parallel feeding can solve one of high-mix automation's biggest problems: moving different parts quickly, at the same time, without stopping the line.

Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.

Sign up for:

Earth Matters Journal

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.

Share this page:

Advanced Search Options

Search for:

Search scope:

Type:

Search in:

Date range:

The last

Sort by:

Sign up for:

Earth Matters Journal

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.